Gearheads - Find the Best Deal

Home

Search or browse by merchant, category or brand

Price search results for Profile Design T2 Clip On TT Bars 

 
Image of Profile Design T2+ Clip-On TT Bars
 

Profile Design T2+ Clip-On TT Bars

For years, the ski-bend aero bar was everything. Luckily, people weren't satisfied. Eventually, racers were cutting off the ends of their ski-bend bars, which led to a straight bar being tested in the tunnel. Aero, when parallel or nearly parallel to the ground, yes. The resulting position was more like a bullet. It worked for some, but for most it was too low. So, with a subtle S-bend, Profile Design's T2+ Clip-On TT Bars are the solution. Your hands are still low and "aggressive," but the difference in height between your armrests and the end of the extensions is minimized to enhance comfort. The big difference between using a ski-bend and an S-bend is that the S-bend, ironically, is more like how skiers hold their poles when fully tucked -- your wrists are bent and your hands are tilted down. The 335mm S-bend extensions are made of 6061 aluminum and are mated to the same clamps and hardware found on the T1 aero bars. The handlebar clamps, made from forged 6061 aluminum, tighten to the bars separately from the extensions. These clamps are separate from the armrests. So, you're able to first determine the appropriate width, and then set the length of the extensions and angle of the armrests. And since the armrest clamp is round on a round tube, you're able to adjust the cant of the armrests. Accordingly, this provides some height adjustment, as well as allowing you the opportunity to have the armrests tilted inward or outward. For those who like a narrow position, having the armrests tilted upward toward the stem provides a secure feeling. And for those who prefer a wide position, we recommend that you lower the armrests and tilt them outward. The armrest clamps, known as J2 Brackets, are also able to be moved fore and aft on the extensions themselves. J2 brackets allow the user to set the F-19 armrests at two different widths, three fore/aft positions, and to adjust the angle of the rests. Included with the F-19 armrests are 12mm spacers that allow a higher r...

Price: 111.99 from Backcountry

Retailer Product Name Price  
Backcountry Profile Design T2+ Clip-On TT Bars 111.99 Visit Store

Related Products

 
Image of Profile Design T3+ Clip-On TT Bars
 

Profile Design T3+ Clip-On TT Bars

Carbon isn't every cyclist's cup of tea. And whether you appreciate the strength of aluminum or the price, Profile Design's T3 Plus Clip-On TT Bars will make your cockpit aerodynamic without breaking the bank. Profile Design's T3 Plus clip-on TT bars...


 
Image of Profile Design T3+ Carbon Clip-On TT Bar
 

Profile Design T3+ Carbon Clip-On TT Bar

Unlike many companies that sell base bar and extensions as a one-piece deal, Profile Design has another option if you're looking to customize your tri or time-trial position. If you use a Profile base bar for a complete setup, or you just want to use...


 
Image of Profile Design ADL Aluminum Clip-on Aerobars
 

Profile Design ADL Aluminum Clip-on Aerobars

One of the first cyclists we noticed using extensions with an S-bend shape on bars like the Profile Design ADL Aluminum Clip-on Aerobars in a time trial was Ullrich, the German powerhouse and perennial Tour runner-up. That's no surprise, as riders like...


Related Items on eBay

 
Image of Profile Design T2+ Cobra Carbon Clip-On TT Bar Black Carbon One Size
 

 
Image of Profile Design T2+ Clip-On TT Bars
 

 
Image of Profile Design T2+ Clip-On TT Bars
 

 
Image of Profile Design T2+ Cobra Carbon Clip-On TT Bar
 

Sorry, no results from eBay were found!

Related Items on Amazon

Sorry, no results from Amazon were found!

Tweets by @geartacker

Gear Tacker Price Comparison Engine

Privacy Policy